No matter where we live, what we do – a pair of Logger boots come in handy as your heavy-duty working boots whenever you are out doing stuff in a series of challenging weathers. That is why these boots are ideal for rain, snow, and even when you’re out exploring jungles and tough terrains. But, for that, you need to know how to tie logger boots correctly.
No matter how tough your boots are, they will not provide ample protection to your feet if you don’t wear them properly. Your boots will only feel comfortable and protect your feet if you know the right techniques to lace them.
Contents
Logger boots lacing techniques:
There are traditional methods of lacing; again, it is always better to learn a few new techniques which can serve you in many situations. Some of them may be complicated and require a little more time and effort, but ultimately, they will look stylish, fit you better, and provide better security. How loggers tie their boots? You may have wondered this, too. In the following, we will discuss some easy and popular methods of how to lace up logger boots.
The 2-1-3 lacing method
Among all boot lacing methods, the 2-1-3 lacing method remains a popular one. While some people complain about ‘lace bite’ about many lacing methods, this technique will serve them efficiently. In addition, this method drastically diminishes lace bites without compromising on fittings and security.
To tie your boots in this fashion, first, you have to identify three pairs of eyelets around the ankle. Lace your boots normally from bottom to the upper part and again to the lowest pair of eyelets in that area. You should start from the fourth pair of eyelets to the top in case your boots have eight pairs of eyelets. The lace will go across to the second or middle of the three eyelets around the ankle. Then, it shall come back across to the first or bottom. After that, it will go across and till the top or the third eyelet of your ankle. The rest shall go as usual, towards the top of your boot.
There are many advantages of tying your boots in this method. The 2-1-3 method provides more room for your ankle while hugging your feet tightly. This results in security without the uncomfortable lace bite. You can wrap your laces around fully at the top for better results.
The only downside of this method is that it can take more time. Also, beginners may find this method a bit complicated to follow.
The ladder lacing method
Another great example of tying logger boots is Ladder Lacing. This method is complicated, hence requires more time and effort. However, once you tie them, your boots give you the utmost support. With that, you get better security.
To tie your boots in this method, start by lacing from the back of the lowest eyelets. Go to the next eyelet vertically. After that, go through the top and to the backside, then to the upper eyelets. After that, go across to the upper part. Put the lace under the other lace and pull it tightly. Then, bring the lace to the top and put it into the next eyelet towards the top vertically. Repeat this pattern up to the top of your boots and tie as usual.
This method creates an interlocking pattern like a ladder, where all the laces hold in place under each other. Hence, this is a favorite for hikers, and firefighters, who need a lot of security in their field.
The advantages of this method are – your boots stay tightened throughout the day and hold on.
The drawbacks are that once you fully lace the boots, it can be hard to tighten or loosen in further. Moreover, most people find this method time-consuming.
The heel-lock lacing method
Heel-Lock Lacing Method is probably one of the most popular lacing methods, and hence, people have been using it for a long time. Mountaineers, firefighters, lumberjacks, and other professionals have been using this technique primarily. If you don’t know how to tie logger boots using other methods, this one’s for you.
This method is very secure; allows a tighter hold around the heels in comparison to the traditional criss-cross or bow-tie method. Another great thing about this method is that it only concerns the last two pairs of eyelets.
The tying method is pretty straightforward. You can follow the typical criss-cross pattern up to the top but leave the last two pairs of eyelets. Put each lace-up vertically, so each one goes straight up to the above eyelet. Then, thread each lace under the opposite lace, above the top laced eyelet. Once you’re done, pull the laces tight and tie a standard bow knot.
The greatest advantage of this method that it is tried and tested for ages; so, you can be sure about the security and comfort. It makes to boot rigid in the upper part. It also takes up less time than other methods.
The only drawback of this technique is since you’re tightening the boot in the upper area, you can feel some lace bite.
How to tie logger boots in Military style lacing?
People who need to wear boots for long hours, military boot lacing methods serve them perfectly. Once you learn how to wear logger boots in this manner, you’ll be ready to spend a long time without adjustments.
Initially, start from below of the boot. Tie the laces from inwards to outwards. Then, bind the laces upwards through the following eyelets. Do not cross them. After that, tie the laces within the eyelets of the opposite side. Then go upwards from the rest of them. Now, follow the same pattern towards the top. Tie the laces into a standard bow knot. You’ll see all the vertical crosses on the outside and the parallel crosses inwards.
This method brings down the number of crossovers but does not provide much ankle support. Beginners will find this method difficult as it is very time consuming.
If you have bought a pair of logger boots and wondering how to tie logger boots, these methods will serve you effectively. The methods provide you with a variety of choices, so you can try and figure out what works best.
Frequently Asked Questions Of How To Tie Logger Boots: 4 Unique Methods
How Do You Lace Logger Boots?
To lace logger boots, start at the bottom and create an “x” pattern, pulling the laces through each eyelet. Proceed to the next set of eyelets, repeating the process and moving upwards.
What Are The Benefits Of Wearing Logger Boots?
Logger boots usually have soft soles that offer comfortable cushioning and reduce fatigue during long hours of work. They also provide excellent ankle support and protection.
How Do You Tie Logger Boots For Maximum Ankle Support?
To tie logger boots for maximum ankle support, lace them through all of the eyelets up to the top. Then, criss-cross each lace on each side and tuck them back under the laces on the opposite side before tying a knot.
Conclusion
Through this article we covered four unique methods for tying logger boots – the surgeon’s knot, the heel lock, the eyelet pairing, and the overhand knot – each with their own benefits and suitable situations. It’s undoubtedly important to tie your logger boots correctly, so that you can work hard and safely in them without any discomfort.
The right knot can prevent blistering and slippage, as well as protect your feet from potential hazards. Whatever knot you choose, make sure to pull it tight and test it out before starting work. Remember to keep the laces even and untwisted, and use extra caution in wet or slippery conditions.
With the methods we’ve covered here, you should be able to find one that works well for your needs. We hope this guide has been useful for you and wish you good luck in your future logging endeavor.
Read more:
More:
1 thought on “How to Tie Logger Boots: 4 Unique Methods”
Comments are closed.